
Home / Exterior Painting
Exterior & Interior Painting in Western Kentucky & Tennessee
Inside and out — siding, trim, garages, residential and commercial buildings and full interior repaints across Graves, Calloway, Marshall, McCracken and Carlisle counties. Prepped properly, then finished in Sherwin-Williams so the coat outlives the next few summers.
A repaint is the cheapest thing you can do to a house that changes everything about it. New siding runs into five figures fast. A properly prepped and painted exterior costs a fraction of that and fixes the thing you actually notice from the road — and inside, a fresh coat resets a whole room in a weekend.
What we paint
- Exterior house painting — vinyl, wood, fiber cement, brick and masonry
- Interior painting — walls, ceilings, trim and full room repaints
- Exterior trim — fascia, soffits, window and door surrounds, shutters
- Garages — doors, frames and detached buildings
- Residential — homes, additions, porches and outbuildings, inside and out
- Commercial — storefronts, offices and rental property, inside and out


On paint
We use Sherwin-Williams by default on every job — unless you’d rather we used a different brand, in which case we’ll use whatever you specify. We reach for it not because it’s a name to drop, but because coatings are where the difference between good and cheap shows up fastest — in how the color holds and how long the film stays flexible through a Kentucky and Tennessee summer-to-winter swing.
Already picked a color? Bring it. Haven’t? That’s a normal part of the conversation, and there’s no rush on it.
How we actually do it
Inside or out, the order is the same — the surface gets made sound before any color goes on. What changes is the prep.
- 01Walk it with you
We look at the job together — inside or out, what’s failing, what’s fine, what needs patching or priming rather than paint. You get a written estimate off the back of that, not a number over the phone.
- 02Protect and prep
Outside, that’s a soft wash, then scraping and sanding everything loose. Inside, it’s filling nail holes and dents, sanding smooth, and masking off floors, trim and fixtures. Nothing gets painted until the surface is sound.
- 03Prime what needs it
Bare wood outside, fresh patches and water stains inside — they get spot-primed so the topcoat goes on even and stays put. Paint sticks to primer; it doesn’t stick to weathered timber or bare drywall mud.
- 04Caulk and cut in
Gaps get sealed and lines get cut by hand — around trim, windows, ceilings and corners. Clean lines are where a paint job is judged, so it’s where the time goes.
- 05Paint in the right finish
Sherwin-Williams — or the brand you chose — goes on in the sheen that suits the surface: tougher finishes where they take abuse, flatter where you want a wall to disappear.
- 06Clean up
The room, or the yard, goes back the way we found it. When we leave, the only sign we were there is the finish.
Here’s the thing about “properly prepped”: it’s doing a lot of work, it’s the part nobody sees, and that’s exactly why it’s the first thing to get skipped.
Why paint fails early
When paint lifts, peels or flakes a year or two after it went on, it’s almost never the paint’s fault. It’s nearly always something that got skipped underneath it:
- It went over chalk, mildew or grime. Outside, old siding sheds a fine powder; inside, kitchen and bath walls carry a film of grease and dust. Paint over either and it’s gripping dirt, not the wall.
- A loose or glossy surface wasn’t dealt with. A new coat over failing paint fails on the old coat’s schedule — and fresh paint over a slick, glossy wall with no scuff or primer just slides off.
- Bare spots never got primed. Weathered wood outside, and new drywall mud or water stains inside, all drink paint unevenly and let go of it unevenly — unless they’re primed first.
- Moisture was still in the surface. Outside, from washing at full pressure and painting before it dried; inside, from coating a bathroom or a fresh patch before it cured. Trapped moisture pushes the film right back off.
Every one of those is a prep failure, and every one of them is avoidable. It just takes longer, which is why the cheapest quote is usually the most expensive one in the end.
Where we work
Murray, Mayfield, Paducah, Benton, Fancy Farm, Arlington, Symsonia, Hickory, Wingo, Sedalia, Lowes, and the rest of Graves, Calloway, Marshall, McCracken and Carlisle counties. If you’re near the edge of that, ask anyway.
Next step
Get a number you can actually plan around.
Tell us about the property and we’ll come look at it. The estimate is free and it’s written down.